Solar Permit Plans | Sun Supply PV

Get a Solar Building Permit

Sun Supply PV is pleased to offer Solar Permit Packages through our Design Team to ease the stress on you or your solar contractor. We customize each package your solar installation, including compliance with NEC Regulations and local city codes. Our residential packages start at $400, and can take up to 1-2 weeks to complete, but most initial drafts are completed within 1-2 days. Please contact your sales rep for pricing on ground mount, utility, or commercial permit packages.

This package is not a building permit, you will need to submit this package to your local AHJ (Authority Having Jurisdiction) which would normally be the local building department. Many areas accept this submission digitally but some you may have to print and hand deliver. Some AHJ may require structural or electrical engineer stamps which Sun Supply PV can provide. If required, those stamps are an additional $300. Please check with your jurisdiction to see if those stamps are required for your project.

See a sample Permit Package or complete the form below to get the process moving!

In addition to filling out the form below, be sure to purchase the residential plans package here.

Solar PV Design Request Form

"*" indicates required fields

Customer Information

Property Owner*

First Name Last Name

Installation Type*

Pricing starts at $400 for the reisdential roof mount package. Other packages can vary depending on your location. Please check with your sales rep for further pricing details.

Job Site Address*

Street Address City State Postal code

Customer Address (If different than Job Site Address)

House number Street name City State State

Email*

Phone Number*

Will a Licensed Contractor be Installing the Solar PV System?*

Yes

Contractor Information

Company Name*

Contractor Name*

First Name Last Name

Contractor E-mail*

Contractor Phone Number*

Contractor License Number and Classification*

Contractor Business Address*

Street Address City City Postal code Country

Preferred Interconnection*

AHJ Name*

Utility Name*

Electrical Equipment

Will the Main Service Panel (MSP) be Upgraded*

Yes

Existing MSP Breaker Rating*

Existing MSP Bus Bar Rating*

New MSP Breaker Rating*

New MSP Bus Bar Rating*

Is the Main Breaker a Center-fed Breaker?*

Yes

Location of Main Service Panel*

(ie. South side of building near garage, etc.)

Will a Sub-Panel be Used to Connect the Solar PV System to the MSP?*

Yes

Sub-Panel Breaker Rating*

Sub-Panel Bus Bar Rating*

Location of Sub-Panel*

(ie. South side of building near garage, etc.)

How will Conduit be Run?*

Externally Through Conduit on the Roof

Through Attic In Flexible Metallic Conduit

Other

Make and Model of Solar Modules (Panels)*

Solar Module Quantity*

Inverter Brand*

Enphase Microinverter

SMA Sunny Boy

Tigo

Sol-Ark

SolarEdge

Other

Inverter Model*

Make and Model of DC Optimizer or Rapid Shutdown*

Will You Be Adding Battery Back Up?*

Yes

Battery Make & Model*

Battery Quantity*

Array Location and Racking

Please Select the Solar Array Mount Type*

Pitched Roof - Flush Mount

Ground Mounted

Flat Roof - Ballasted

Flat Roof - Mechanically Attached

Roof Type*

Composition Asphalt Shingle

Flat Tile

S Tile

W Tile

Metal- Corrugated

Metal- Standing Seam

Slate

Other

Flat Roof Type*

Tar & Gravel

Membrane

Other

Rafter Size and Spacing*

Roof Construction*

How Many Stories is the Building?*

Slope of Groud Around Array and Direction*

Tilt Angle of Solar Array*

Make and Model of Racking*

Make and Model of Roof Mounts*

Untitled*

3" Pipe

2" Pipe

Roof Attachment Spacing*

Please enter a number from 2 to 8.

(4 ft is most common)

Upload Pictures*

Please upload a picture of your main service panel (and sub panel if applicable) with cover open. Also send sattelite image of roof marking where your main service panel is located, and solar panel layout/locations (if known). Any additional files or images you feel are important to your solar installation can be emailed to sales@sunsuppv.com.

Drop files here or

Accepted file types: jpg, pdf, jpeg, Max. file size: 10 MB, Max. files: 3.

Notes

Terms & Conditions*

I Have Read the Terms & Conditions

Solar Design Contract
Parties

Buyer (hereinafter referred to as “You” or “Credit Card Holder” or “Client”). Seller, Sun Supply PV, LLC, a CA Limited Liability Company (hereinafter referred to as “Our”, “Us” or “We”).

Electronic Consent

In lieu of this electronic “Terms & Conditions”, you have a right to request a paper copy of these “Terms & Conditions” before signing up. If you want a paper copy, please talk to one of our sales representatives or call us toll-free at 1-888-764-2588 and we will send you a paper copy via email or fax.

Terms and Conditions

1) STANDARD TERMS AND CONDITIONS:

These are the standard terms and conditions for Solar Permit Design and Development and apply to all contracts and all work undertaken by Sun Supply PV, LLC for its clients.

2) OUR FEES AND DEPOSITS:

Solar permit designs are normally $400. If the project has unusual residential requirements or is a commercial application, the cost will be discussed and agreed upon prior to work. We reserve the right not to commence any work until the payment has been paid in full. All prices listed are in U.S Dollars. We will cover changes proposed by the permitting office free of charge, however, if the client proposes changes to the design, we reserve the right to charge $50 per change. This will be discussed prior to changes being worked on.

3) REFUND POLICY:

We work sincerely & dedicatedly to satisfy you. Sometimes the permitting office has changes, and we will work diligently to correct the changes in a timely manner.
Once the Design Request Form has been submitted and payment has been received, work will begin. If refund is requested at this time, once work has begun, we will refund 50% of the total cost.
There will be no refunds once the design has been completed and sent to the customer.

4) SUPPLY OF MATERIALS:

You must supply all materials and information required by us to complete the work in accordance with any agreed specification. The required information includes the Request Form and images of the electrical panel and application.

5) VARIATIONS:

We are pleased to offer you the opportunity to make revisions to the design. However, we have the right to limit the number of design proposals to a reasonable amount and may charge for additional designs if you make a change to the original design specification. Changes are $50 per.

6) CONSEQUENTIAL LOSS:

We shall not be liable for any loss or damage which you may suffer which is in any way attributable to any delay in performance or completion of our contract, however that delay arises.

7) DISCLAIMER:

Notwithstanding anything to the contrary contained in this contract, neither Sun Supply PV, LLC nor any of its employees or agents, warrant that the functions contained in the web design project will be uninterrupted or error-free. In no event will Sun Supply PV, LLC or its owners or employees will be liable to you or any third party for any damages, including, but not limited to, service interruptions caused by Acts of God, or any other circumstances beyond our reasonable control, any lost profits, lost savings or other incidental, consequential, punitive, or special damages.

8) ASSIGNMENT:

We reserve the right to subcontract any services that we have agreed to perform for you as we see fit.

9) NON-DISCLOSURE:

We (and any subcontractors we engage) agree that we will not at any time disclose any of your confidential information to any third party.

10) RIGHT OF REFUSAL:

Sun Supply PV, LLC reserves the right to refuse or terminate service to anyone for any reason not prohibited by law. Also we have the right to be free from acts or threats of disruptive behavior, abusive and/or offensive language, including intimidation, harassment and/or coercion, which involve or affect our operation. Abusive communications in any form (email, phone, in person, etc.) are strictly not tolerated. No refund would be provided in case of abusive communications.

11) GOVERNING LAW:

Regardless of the place of signing of this agreement, you agree that for purposes of venue, this agreement was entered into in California, United States. Any dispute will be litigated or arbitrated in the State of California, and you hereby consent to the personal jurisdiction of the California Courts.
This Agreement constitutes the entire understanding of the parties. Any changes or modifications thereto must be in writing and agreed by both parties.

CAPTCHA

Get a Solar Building Permit

Solar PV Design Request Form

Customer Information

Contractor Information

Electrical Equipment

Array Location and Racking

Quality products. Easy process. Happy customers.

Error

Login

Register